G2 CRANK CASE OIL WAY
-
- Member
- Posts: 225
- Joined: Sat Jan 01, 2000 12:00 am
- Location: HAMPSHIRE UK
G2 CRANK CASE OIL WAY
I have probed it with a piece of wire and it seems to end in a dead end about an inch deep.
I have several G2 crank cases but this is the only one with this modification.
You do not have the required permissions to view the files attached to this post.
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: G2 CRANK CASE OIL WAY
Poke it clear. It's the later, modified oil feed to the camshaft lobes.
I think this crankcase is to be used with the later-type longer stroke CSR oil pump.
More info here: http://www.jampot.com/forum/viewtopic.p ... 10#p186096
I think this crankcase is to be used with the later-type longer stroke CSR oil pump.
More info here: http://www.jampot.com/forum/viewtopic.p ... 10#p186096
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Member
- Posts: 225
- Joined: Sat Jan 01, 2000 12:00 am
- Location: HAMPSHIRE UK
Re: G2 CRANK CASE OIL WAY
Thanks Clanger, very informative, I will give it a poke.
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: G2 CRANK CASE OIL WAY
as opposed to my 350 or older 250's that just relied on oil sloshing around in the casingclanger9 wrote:Poke it clear. It's the later, modified oil feed to the camshaft lobes.
You do not have the required permissions to view the files attached to this post.
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed