Gearbox Parts

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Mick D
Posts: 2886
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Gearbox Parts

Post by Mick D »

Ozmadman wrote:Pity they don't so an X/quad version for the small ones in the selector shaft
Hi

I don't know the required dimensions but it may be worth someone who does having a look here:

https://maydayseals.co.uk/35-quad-rings-

Regards Mick
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Gearbox Parts

Post by ajscomboman »

Mick D wrote:
Ozmadman wrote:Pity they don't so an X/quad version for the small ones in the selector shaft
Hi

I don't know the required dimensions but it may be worth someone who does having a look here:

https://maydayseals.co.uk/35-quad-rings-

Regards Mick
SNAP!!!! I've just been looking at superseals as well as mayday.
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: Gearbox Parts

Post by Martin.S »

My apologies to the Spares Dept - there is a X o ring listed.
The smaller rings are available - the N.O.C list them as 040079SQ under the lightweight section.
Regarding earlier comments why have a lightweight section for spares if you have to look up by part number. As a prospective purchaser I would look under my specialised section for my spares - I wouldn't go to the Bakers for a pound of pork sausages!
G15 Roy
Member
Posts: 3546
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Re: Gearbox Parts

Post by G15 Roy »

Martin.S wrote:My apologies to the Spares Dept - there is a X o ring listed.
The smaller rings are available - the N.O.C list them as 040079SQ under the lightweight section.
Regarding earlier comments why have a lightweight section for spares if you have to look up by part number. As a prospective purchaser I would look under my specialised section for my spares - I wouldn't go to the Bakers for a pound of pork sausages!
Makes me wonder why you joined the AMC club in the first place.
Roy
User avatar
Martin.S
Posts: 443
Joined: Sun Mar 18, 2018 12:02 pm
Location: Bristol UK

Re: Gearbox Parts

Post by Martin.S »

Spares?
User avatar
Ozmadman
Posts: 2651
Joined: Wed Dec 14, 2011 1:02 am
Location: ESSEX UK

Re: Gearbox Parts

Post by Ozmadman »

G15 Roy wrote:
Martin.S wrote:My apologies to the Spares Dept - there is a X o ring listed.
The smaller rings are available - the N.O.C list them as 040079SQ under the lightweight section.
Regarding earlier comments why have a lightweight section for spares if you have to look up by part number. As a prospective purchaser I would look under my specialised section for my spares - I wouldn't go to the Bakers for a pound of pork sausages!
Makes me wonder why you joined the AMC club in the first place.
That's not a very good attitude towards a member who has a valid point. :roll: :roll:
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
ChrisTheChippy
Member
Posts: 274
Joined: Wed Feb 07, 2018 12:02 am
Location: Essex

Re: Gearbox Parts

Post by ChrisTheChippy »

That came across as a bit harsh Roy . Having met you I guess that was not your intention but guests regularly browse this forum and if they perceive that is the kind of help and welcome they can anticipate they may think again about the benefits of becoming a member .
Sorry but that's the truth and the club will only survive with a constant flow of new members .
Regards Chris.
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: Gearbox Parts

Post by SPRIDDLER »

ajscomboman wrote:
Martin.S wrote:You see - that makes this all hard work - why aren't they listed in the L/W section?
Because it's not a specific L/W part as it fits both therefore it's listed by part number according to the factory books. When I have time I'll add the description so can be found more easily.
In an ideal world all parts would be listed by part number, description and by photos/illustrations in all of their relevant sections of the Club Spares catalogue.
The nub of the situation is that we rely heavily on very, very few volunteers spending much of their family/leisure/fettling time contributing in so many different ways for the benefit of members.

(Although I've been a member for thirteen years I haven't been able to ride my Matchless for the past eight years and can do little fettling as a result of biking injuries. I'm fortunate to have the opportunity to apply my online virtual spanners and also enjoy the pleasures of participating in Club events on my adapted modern bike).
'There is a tide in the affairs of men
Which taken at the flood............'
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Gearbox Parts

Post by ajscomboman »

SPRIDDLER wrote:
ajscomboman wrote:
Martin.S wrote:You see - that makes this all hard work - why aren't they listed in the L/W section?
Because it's not a specific L/W part as it fits both therefore it's listed by part number according to the factory books. When I have time I'll add the description so can be found more easily.
In an ideal world all parts would be listed by part number, description and by photos/illustrations in all of their relevant sections of the Club Spares catalogue.
The nub of the situation is that we rely heavily on very, very few volunteers spending much of their family/leisure/fettling time contributing in so many different ways for the benefit of members.

(Although I've been a member for thirteen years I haven't been able to ride my Matchless for the past eight years and can do little fettling as a result of biking injuries. I'm fortunate to have the opportunity to apply my online virtual spanners and also enjoy the pleasures of participating in Club events on my adapted modern bike).
Precisely that Nev, limited time and lots of historical wrong descriptions and parts being listed with modern numbers that merely add to the confusion. Having plenty of time on my hands as I recover from surgery I've gone through the entire system. I've removed as many duplicate and contradicting numbers and descriptions as I can find. Added parts to categories along with original numbers where they have dual roles and weren't included. Hopefully it'll all help but would add that you do go snowblind to it all and there are probably still some that could be improved, or I've simply missed them. If when browsing anyone spots errors I'd ask them to drop me a line president@jampot.com and I'll dive in and sort it.
User avatar
clanger9
Posts: 1165
Joined: Sat Jun 20, 2015 9:38 am
Location: Chester, UK

Re: Gearbox Parts

Post by clanger9 »

Brilliant, I'll do that. Thanks, Rob.

Is there a “feedback” link on the parts shop? Maybe add something against each part with a “If you have a suggestion to improve this description, please click here” - that way we can keep the improvements coming...
1989 Moto Morini Dart 350
1993 Ducati 750SS
Locked