Reading through the posts here on the forum a few people have had trouble removing the rear oil pump plug, so instead of making up a large screwdriver to install/remove the plug I drilled it out, tapped it and brazed in a Allen bolt. I then tried out the Electroplating guide that Braaap gave a Youtube link to in the "General" section. That worked really well with the Zinc plating.
Oil Pump Plug Mod and Zinc Pating
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Oil Pump Plug Mod and Zinc Pating
You do not have the required permissions to view the files attached to this post.
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Oil Pump Plug Mod and Zinc Pating
Lovely job! That's a huge improvement on the big slot...
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS