Engine Rebuilt - Help
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Engine Rebuilt - Help
We are rebuilding an engine Model 14 I ordered main bearing from Spares website but they send me AMC17 I think it is of 350cc as bigger any suggestions
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Engine Rebuilt - Help
If you are referring to the big-end bearing, then yes there are at least 4 different combinations of con rod & bearing depending on the model year. Late CSRs and 350 need the big one.
Details here: http://archives.jampot.dk/book/Spares_l ... o_1966.pdf (look under FLYWHEELS)
Details here: http://archives.jampot.dk/book/Spares_l ... o_1966.pdf (look under FLYWHEELS)
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Mine is 250cc 1962. Should AJS M14 work
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Any idea who sell them ?
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Engine Rebuilt - Help
Try Alpha Bearings or Russell Motors (telephone only, they don't check emails)
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Bearing Sorted it is coming up nicely.
Noticed I have some items missing to complete rebuild such as shaft keys etc. any ideas from where I should try my luck
Noticed I have some items missing to complete rebuild such as shaft keys etc. any ideas from where I should try my luck
You do not have the required permissions to view the files attached to this post.
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Engine Rebuilt - Help
Looking good! For the keys, try AMC Classic Spares.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Hi, anyone else that can assist as they are closed atm. Thanks
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Machining parts ourself, I am lucky to have my father as engineer
You do not have the required permissions to view the files attached to this post.
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Engine Rebuilt - Help
Parts Resprayed
You do not have the required permissions to view the files attached to this post.