Thanks Ozmadman - the "1965 Models Only" section at the bottom confirms that the late CSRs did have the ratios shown in the F Neill manual.
I wonder why those gears aren't identified in the 1965/66 parts list?
1966 G2 CSR TRAUMA
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: 1966 G2 CSR TRAUMA
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Member
- Posts: 5
- Joined: Mon Jan 01, 1990 12:00 am
- Location: YORK UK
Re: 1966 G2 CSR TRAUMA
Hi I have a 196 250 CSR, seems all your questions have been answered. I have a problem with clutch and have measured the push rod at 10 1/4" Can you measure yours and see if it is the same length as I feel it coul be too long
Phil Taylor
Phil Taylor
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: 1966 G2 CSR TRAUMA
The rod in my spare gearbox is 9.9"
I haven't tested it, so I can't confirm if this is the correct length.
I haven't tested it, so I can't confirm if this is the correct length.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: 1966 G2 CSR TRAUMA
Did you find out the correct length of the clutch rod?
From what, I've been able to find out, there appear to be two clutch rods:
042208 9.9" long, fitted to G2 or Model 14 up to 1961
042725 10.1" long, fitted to all other models (CS, G5, Model 8, CSR, G2 & Model 14 1962-)
Hopefully the above is correct. Can anyone confirm?
From what, I've been able to find out, there appear to be two clutch rods:
042208 9.9" long, fitted to G2 or Model 14 up to 1961
042725 10.1" long, fitted to all other models (CS, G5, Model 8, CSR, G2 & Model 14 1962-)
Hopefully the above is correct. Can anyone confirm?
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS