Picked up my new/old model 14, what a state but hopefully be a nice looking classic after some hard graft. While my bike is in bits i'm going to rebuild the wheels and fit new tyres. Tyres and tubes seem pretty easy to come by however finding the correct rims and spokes is looking tricky. I can see a few of you guys have found these yourselves could you point me in the right direction for sourcing these items?
Cheers
Sourcing 17inch rims and spokes
-
- Posts: 24
- Joined: Tue Jan 31, 2017 12:44 pm
- Location: London
-
- Member
- Posts: 1176
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: KENT UK
Re: Sourcing 17inch rims and spokes
Devon rims, every time for me. They do 17" in wm1 and 2, (maybe even 3, never looked). In stainless and chrome. You need to speak to the boss re spoke length. But, make sure of the hubs that you have. their are some for bog standard 250s and better ones for CSRs and 350s
- Rockerbri
- Member
- Posts: 81
- Joined: Sat Jan 17, 2015 11:51 am
- Location: uk
Re: Sourcing 17inch rims and spokes
Good luck on your re-build Fish91 i have just finished my 250csr took 2 years of hunting for parts etc etc mind you it was just an engine and frame when i picked her up. Ive never had the correct wheels for my one still looking as above Devon rims are good for the rims etc...lots of luck.
MATCHLESS G12 CSR...MATCHLESS 250 CSR...AJS MODEL 20 ...BSA A65 LIGHTNING...HARLEY DAVIDSON ROADKING & SPORTSTER...
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Sourcing 17inch rims and spokes
Hi
I'd highly recommend Devon Rim Company - not the cheapest but I can't fault the rims, spokes and service I received.
I re-built my wheels at home - found it not difficult and very therapeutic / satisfying.
Regards Mick
I'd highly recommend Devon Rim Company - not the cheapest but I can't fault the rims, spokes and service I received.
I re-built my wheels at home - found it not difficult and very therapeutic / satisfying.
Regards Mick
-
- Member
- Posts: 601
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: FRANCE
Re: Sourcing 17inch rims and spokes
Have you tried CENTRAL WHEEL COMPONENTS, in COLESHILL ?
-
- Posts: 20
- Joined: Wed Mar 29, 2017 9:12 am
- Location: Netherlands
Re: Sourcing 17inch rims and spokes
Is the original front and rear wheel with trade dunlop mark made in britain wm 2 17 ?.
-
- Posts: 24
- Joined: Tue Jan 31, 2017 12:44 pm
- Location: London
Re: Sourcing 17inch rims and spokes
Yes i beleive it is wm2. Why do you ask?
-
- Posts: 20
- Joined: Wed Mar 29, 2017 9:12 am
- Location: Netherlands
Re: Sourcing 17inch rims and spokes
Well bought bits and pieces and they are in the basket aswell....