Brake "anchor" bolts
-
- Member
- Posts: 746
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: Brake "anchor" bolts
Ben, make sure that there is sufficient metal in the steel insert in the brake plate as you are in effect drilling and tapping for a larger bolt. The insert in the heavyweight brake plates has thick walls but I don't know anything about the lightweights. Andy
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Brake "anchor" bolts
missed that continuation page Duncan, I never took a real good look. It does seem over the years things changed. A mixture of studs and bolts. I also try to use my fading memory, but that only relates to bikes I own. Keep watching my back. thanks.Duncan wrote:Its on the next page Rob:
- BultacoBen
- Member
- Posts: 107
- Joined: Sun Jul 12, 2015 9:48 pm
- Location: Bristol
Re: Brake "anchor" bolts
Am investigating helicoiling with a couple of local workshops, particularly whether they think there's enough of the steel insert left to be feasible.
If it turns out I require a new brake plate, can anyone help with the correct parts number?
In manuals and spares list the only diagram and part number is that below, 043270,which is clearly different to my brake plate pictured at the start of this thread.
Did the brake change for later years? Mine was first registered in 1967. The brake changing for later models is ringing some bells in my head for something I've read before somewhere but I can't quite summon it forth...
If it turns out I require a new brake plate, can anyone help with the correct parts number?
In manuals and spares list the only diagram and part number is that below, 043270,which is clearly different to my brake plate pictured at the start of this thread.
Did the brake change for later years? Mine was first registered in 1967. The brake changing for later models is ringing some bells in my head for something I've read before somewhere but I can't quite summon it forth...
You do not have the required permissions to view the files attached to this post.
http://www.ben-eddings.com
1966 Matchless G2 CSR scrambler
1986 Suzuki DR600 long-range explorer
1971 BSA B50T street tracker
1966 Matchless G2 CSR scrambler
1986 Suzuki DR600 long-range explorer
1971 BSA B50T street tracker
- Janet
- Member
- Posts: 4131
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
Re: Brake "anchor" bolts
The CSR wheel is a bit different from the earlier versions. The brake plate for the CSR has what looks like air scoops on them. If you cut the grooves out you really have air scoops. The brake plate is on the rhs whereas I believe it was on the lhs on earlier models..
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Brake "anchor" bolts
CSR forks, brake plate & torque arm, differ on 250's
- Janet
- Member
- Posts: 4131
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
-
- Member
- Posts: 3365
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Brake "anchor" bolts
Hadn't meant to start a row about studs. I was really trying to make sure that things were safe. If the PO has bodged the anchor bolt of all things there's always a chance that there's something else and I really would look at the studs and surrounding area in case there's any cracking or mistreatment gone on there.
Scary photo, Janet.
Johnny B
Scary photo, Janet.
Johnny B
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Brake "anchor" bolts
This is a later model with the brake on the right. Not sure when they changed from left to right. Nothing new though, back in 1936/37 the front brake changed sides. Those days it affected more big parts like forks and wheel plus smaller fittings.
- Janet
- Member
- Posts: 4131
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
Re: Brake "anchor" bolts
That's my pride and joy there. Why is it scary?56G80S wrote:Scary photo, Janet.
Johnny B
-
- Member
- Posts: 114
- Joined: Tue Aug 30, 2011 4:35 pm
- Location: DEVON UK
Re: Brake "anchor" bolts
The correct bolt is 3/8 x 26 tpi cycle thread.
I can helicoil it for you if can face the hassle of posting it to me. I recently ran out of 3/8 ( and 5/16 ) BCY inserts but have more on order (they are tough to find as most people I suspect use a more common thread form insert such as UNF.)
Bruce
I can helicoil it for you if can face the hassle of posting it to me. I recently ran out of 3/8 ( and 5/16 ) BCY inserts but have more on order (they are tough to find as most people I suspect use a more common thread form insert such as UNF.)
Bruce