Burman Kickstart Lever

These are the front page News Items. Only Club members can add news items to this forum.
Member
Posts: 2
Joined: Thu Jul 21, 2016 10:20 am
Location: UK

Re: Burman Kickstart Lever

Postby Tim Hale » Fri Aug 19, 2016 7:17 pm

Image

Not knowing which gearbox is fitted to my '55 Model 18, I have posted an image just in case some kind soul can help.

If the new kickstart is applicable to my machine, can I ask Janet to put one aside for me.

Unfortunately I am currently on the other end of a very, very long supply chain and not back to the UK until September (and no outgoing email traffic)

Thanks

Tim

Committee
User avatar
Posts: 1013
Joined: Tue Jul 27, 2004 12:00 am
Location: BEDFORDSHIRE UK

Re: Burman Kickstart Lever

Postby Stuoyb » Fri Aug 19, 2016 7:31 pm

You have a Burman B52 gearbox. Standard kickstart (G-43-2) is fixed and currently in stock at the club parts service.
Folding kickstarts for Burman are as rare as 'hens teeth'. If you do a forum search you will find some threads on this subject - there are specialist ones available for comp. bikes - at a price!
Janet is not the contact for club spares - see the contact info on the inside cover of 'Jampot'

Member
Posts: 436
Joined: Thu Feb 27, 2014 9:27 am
Location: Kent, England

Re: Burman Kickstart Lever

Postby JimFitz » Fri Aug 19, 2016 9:15 pm

Pick up any sort of folding kickstart from a bike jumble and cut through the shaft at an appropriate point. Then cut your Burman kickstart shaft at appropriate point and weld the two together.
You could have it chromed if you wish if appearance bothers you.
Then say goodbye to bruised shins and calfs :D

Jim
Too old to Rock and Roll but too young to die.

1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.

Member
Posts: 2
Joined: Thu Jul 21, 2016 10:20 am
Location: UK

Re: Burman Kickstart Lever

Postby Tim Hale » Sat Aug 20, 2016 6:22 am

Jim,

Thanks, I will try to find a folding version, if only to save my shin.

Committee
User avatar
Posts: 7283
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: Burman Kickstart Lever

Postby Rob Harknett » Sat Aug 20, 2016 10:43 am

If you get a folding kick start lever, you have to remember not to forget. Which many of our ageing members have a problem with. You must remember to unfold it to start the bike. Look to make sure is still unfolded if the bike needs a seconded kick. Make sure its fully extended each time and always a good downward kick. So it dose not fold in half way through your kick, and leave you kicking air. This can happen quite easy if your folding lever or boots are slippery or wet. Finally, don't forget to check vibration on a run has not unfolded it, so you catch your leg/shin. Had a bike with a folding lever years ago, that never seemed to stay in position when kicked.

Previous

Return to News Items

Who is online

Users browsing this forum: No registered users and 1 guest