Hi everybody,
i wonder if there is anybody out who can tell me if a conversion to "modern" steering head bearings exists for Matchless frames.
My bike is a Norton P11 and has a G85CSR frame. Because of building in a Ceriani fork, I think about converting to other steering head bearings.
I would be thankful for every hint on this.
Thanks
Bjoern
Steering Head Bearing Conversion
-
- Posts: 1
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: GERMANY
- silverarrow
- Posts: 549
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LEICESTERSHIRE UK
Steering Head Bearing Conversion
Try asking this question on the ajs/matchless egroup as thgis has been done by one of it's members. http://groups.yahoo.com/group/ajsmatchless
Les Smith
Les Smith
Keep smiling
-
- Member
- Posts: 154
- Joined: Fri Jan 01, 1999 12:00 am
- Location: HAMPSHIRE UK
Steering Head Bearing Conversion
I have a P11 Ranger and I also brought a P11A back from USA for my brother in law who has now fully rebuilt it. He converted to taper roller bearings during the rebuild so I will try to get the details for you.
Will be in touch
Tim Roberts
Calne Wilts UK Hybrid Show Organiser
35 Hybrids attending on 19th July (18 P11s)
Will be in touch
Tim Roberts
Calne Wilts UK Hybrid Show Organiser
35 Hybrids attending on 19th July (18 P11s)