Hi all,
I am about to start painting the tank on my 53 G3 project I have the lining details from the club. The plan is to spray the silver then mask it off,then spray the black can you recommend a suitable tape as they are quite tight curves. I know there has been mention of the tape recently but I can't find the post. I did buy some that seemed perfect, too hasty didn't read properly it's not flexible.
Thanks, Colin
Tank detailing
-
- Member
- Posts: 64
- Joined: Mon Oct 17, 2011 9:34 pm
- Location: Bedfordshire UK
-
- Member
- Posts: 456
- Joined: Mon Jun 29, 2015 8:49 pm
- Location: East Yorkshire
Re: Tank detailing
http://www.jampot.com/forum/viewtopic.p ... 88#p220288
Is this the one youre looking for? I uploaded a pdf that might help.
Steve
Is this the one youre looking for? I uploaded a pdf that might help.
Steve
-
- Member
- Posts: 64
- Joined: Mon Oct 17, 2011 9:34 pm
- Location: Bedfordshire UK
Re: Tank detailing
Thanks Steve that's perfect, hopefully in a few weeks I'll be posting pictures 🤔
Colin
Colin
-
- Member
- Posts: 64
- Joined: Mon Oct 17, 2011 9:34 pm
- Location: Bedfordshire UK
Re: Tank detailing
Ps what a superb job on the Panther!!
-
- Member
- Posts: 452
- Joined: Tue May 27, 2003 1:00 am
- Location: SHROPSHIRE UK
Re: Tank detailing
Fine line masking tape, comes in various widths very flexible so no problems on curves, apply to suit your lines then mask up to it. Usually available at vehicle paint supply outlets or motor factors.
-
- Member
- Posts: 77
- Joined: Fri Jul 17, 2020 2:29 pm
- Location: Northants UK
Re: Tank detailing
hi Colin, Can you help me locate the tank lining details on our club site, as i also are doing same as you (57 G11)
Cheers Rod
Cheers Rod
-
- Member
- Posts: 64
- Joined: Mon Oct 17, 2011 9:34 pm
- Location: Bedfordshire UK
Re: Tank detailing
It's under petrol and oil tank from club spares.
Regards Colin
Regards Colin