Hi, does anyone know the thread size of the stud running through the engine/gearbox plates and the crankcases on a 1960 twin? It's the top one behind the cylinders. A mate is working on his bike and has discovered that apparently the nut and washer have come off the chaincase side and the stud and its remaining RH nut and washer has vibrated its way an inch or so towards the distributor.
Thanks,
Malc
Crankcase stud
-
- Member
- Posts: 628
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
-
- Member
- Posts: 610
- Joined: Mon Jan 01, 1990 12:00 am
- Location: NORTHAMPTONSHIRE UK
Re: Crankcase stud
5/16 26tpi
Tony
Tony
-
- Member
- Posts: 628
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
Re: Crankcase stud
Thanks Tony.raffles wrote:5/16 26tpi
Tony
Malc