Bolt Size

Helpful information and requests for assitance and advice
Member
User avatar
Posts: 106
Joined: Sat Sep 14, 2019 4:50 pm
Location: Bristol & East Devon

Bolt Size

Postby Rosy » Thu Nov 07, 2019 7:21 pm

Can someone tell me the size of Part No 000371, Fixing for battery carrier to frame, thats all the sizes TPI, diameter, length, etc.
Draganfly M/Cs do this, Stud, 5/16 x 1-1/16 x CEI26 82-3641, hoping it's the same size. I'm trying to buy all I need from AMC spares, but I find them lacking in some parts.

Member
Posts: 45
Joined: Tue Jun 02, 2015 3:57 pm
Location: Wales

Re: Bolt Size

Postby Mc-Maz » Thu Nov 07, 2019 8:01 pm

000371 is a bolt - 2" x 5/16" x 26tpi cei. I think the original had a rounded head but you may find that rather hard to source but it shouldn’t be a problem if a standard hex head will do. I've found Nooky's Nuts a good source for standard cycle thread nuts and bolts.

Sean

Member
Posts: 2016
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Bolt Size

Postby Mick D » Fri Nov 08, 2019 4:55 pm

Hi

AMC Classic spares will supply the correct bolt with rounded head as will ACME Stainless I believe.

Nooky's Nuts fasteners tend to be set bolts and with the 'wrong' head - depends on how much of a rivet counter you are ;)

Regards Mick

Member
User avatar
Posts: 106
Joined: Sat Sep 14, 2019 4:50 pm
Location: Bristol & East Devon

Re: Bolt Size

Postby Rosy » Fri Nov 08, 2019 5:59 pm

Thanks, not a rivet counter just short of nuts/bolts in general, I could do with a bucket full them, of which I had once but got rid of them, thinking I was done with brit bikes, how dumb!

Return to Help

Who is online

Users browsing this forum: No registered users and 14 guests