G80 Frame Stud Lenghts
-
- Posts: 9
- Joined: Tue Oct 18, 2016 1:30 pm
- Location: SOUTH AUSTRALIA AUSTRALIA
G80 Frame Stud Lenghts
Would any of you out there happen to have the measurements and sizes of the studs/bolts that bolt the frame together for a 1949/50 G80 swing arm? Did anyone make a list of these measurements during a restoration?
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G80 Frame Stud Lenghts
http://archives.jampot.dk/book/Spares_l ... ements.pdf
3 times I said this last week on the forum. Look in the master parts list, where many parts have the dimensions given. If ordering any parts, use the new part no.
Example;
3 times I said this last week on the forum. Look in the master parts list, where many parts have the dimensions given. If ordering any parts, use the new part no.
Example;
You do not have the required permissions to view the files attached to this post.
-
- Posts: 9
- Joined: Tue Oct 18, 2016 1:30 pm
- Location: SOUTH AUSTRALIA AUSTRALIA
Re: G80 Frame Stud Lenghts
Thanks guys, much appreciated.
- spookefoote1956
- Member
- Posts: 1841
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: G80 Frame Stud Lenghts
I was paying attention Rob.
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G80 Frame Stud Lenghts
I have discovered here, always something new to learn from others. Even after 63 years of Motor Cycling. Although through most of those years, I could only learn from others I knew or managed to meet, plus literature, magazines etc..spookefoote1956 wrote:I was paying attention Rob.