Barrell Query
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Barrell Query
Good evening
I have inherited several boxes of spares which includes some barrells, three of which are 500's. Two of these measure approx five and three quarters from the base flange to where the head sits and have 11 fins. This is the same as my own G80. The third barrell measures approx six and three quarters from the base flange to the top and has 14 fins. This is a new one on me. Does anyone know what I may have please?
I have inherited several boxes of spares which includes some barrells, three of which are 500's. Two of these measure approx five and three quarters from the base flange to where the head sits and have 11 fins. This is the same as my own G80. The third barrell measures approx six and three quarters from the base flange to the top and has 14 fins. This is a new one on me. Does anyone know what I may have please?
If it ain't broke, fix it till it is.
- Tolly
- Member
- Posts: 648
- Joined: Mon Jan 01, 2001 12:00 am
- Location: KENT UK
Re: Barrell Query
is there any chance of a picture? As they say a picture - - - - -.
Best wishes.
Best wishes.
_______________________________________________________
Experience is something you don't get until just after you need it.
Experience is something you don't get until just after you need it.
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Barrell Query
I'll have a go tomorrow in daylight. Hope I can remember how to post
If it ain't broke, fix it till it is.
- Duncan
- Member
- Posts: 2132
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: Barrell Query
I may have something similar in the shed, does yours have the cutouts for a twin port head?Brad wrote: The third barrell measures approx six and three quarters from the base flange to the top and has 14 fins. This is a new one on me. Does anyone know what I may have please?
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Barrell Query
Hi Duncan.
Interesting point. I will examine it more closely when I try to take some pics later.
Interesting point. I will examine it more closely when I try to take some pics later.
If it ain't broke, fix it till it is.
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Barrell Query
Hopefully some barrell pics, but I'm new to windows 10 and having difficulty.
I get to "upload attachment"
"choose file"
Pictures are in dropbox where I choose the required pic and open it, then click "add file"
Shortly after I am rewarded with a message saying "file is empty"
Can anyone put me out of my increasing misery?
I get to "upload attachment"
"choose file"
Pictures are in dropbox where I choose the required pic and open it, then click "add file"
Shortly after I am rewarded with a message saying "file is empty"
Can anyone put me out of my increasing misery?
If it ain't broke, fix it till it is.
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Barrell Query
Hi Brad
See here for an explanation of the empty file message
http://www.jampot.com/forum/viewtopic.php?f=11&t=24662
Regards Mick
See here for an explanation of the empty file message
http://www.jampot.com/forum/viewtopic.php?f=11&t=24662
Regards Mick
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Barrell Query
Trying Again
You do not have the required permissions to view the files attached to this post.
If it ain't broke, fix it till it is.
- Duncan
- Member
- Posts: 2132
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: Barrell Query
SNAP!
Although mine is a lot more rusty, I saw Dudley at Ardingly on Sunday and was telling me that it is for a pre war twinport, apparently the gudgeon pin is lower in the piston, he has just at great expense had his repaired as he did not think he would see another one for a while!
Although mine is a lot more rusty, I saw Dudley at Ardingly on Sunday and was telling me that it is for a pre war twinport, apparently the gudgeon pin is lower in the piston, he has just at great expense had his repaired as he did not think he would see another one for a while!
-
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Barrell Query
Well thanks Duncan. Maybe I should advertise it as I dont plan to find a pre-war twin port.
If it ain't broke, fix it till it is.