K2f mag dome long nut
-
- Member
- Posts: 25
- Joined: Wed Jul 15, 2015 8:44 pm
- Location: BANFFSHIRE UK
K2f mag dome long nut
Can anyone tell me what the stud thread is on the end of my K2f mag , which holds the cut out dome in place ( g9 ) as I need to make 2 long nuts as should be fitted to make life easier. Thanks in advance Allan.
- ajscomboman
- Member
- Posts: 3959
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: K2f mag dome long nut
2BA and you can buy long nuts as a standard part if you don't want the hassle.
- Stuoyb
- Posts: 1223
- Joined: Tue Jul 27, 2004 1:00 am
- Location: BEDFORDSHIRE UK
Re: K2f mag dome long nut
The nut from the dynamo draw stud serves the purpose very well.
http://www.jampot-spares.com/store/come ... duct=21226
http://www.jampot-spares.com/store/come ... duct=21226
-
- Member
- Posts: 2159
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Re: K2f mag dome long nut
Special double-ended stud for ali domes. Nadgery but do-able. 2ba as Rob says but hex at mid-point must pass hole in ali dome and then nut on outside etc. Easier to buy than make tbh if available.