K2f mag dome long nut

Helpful information and requests for assitance and advice
Locked
allanmg9
Member
Posts: 25
Joined: Wed Jul 15, 2015 8:44 pm
Location: BANFFSHIRE UK

K2f mag dome long nut

Post by allanmg9 »

Can anyone tell me what the stud thread is on the end of my K2f mag , which holds the cut out dome in place ( g9 ) as I need to make 2 long nuts as should be fitted to make life easier. Thanks in advance Allan.
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: K2f mag dome long nut

Post by ajscomboman »

2BA and you can buy long nuts as a standard part if you don't want the hassle.
User avatar
Stuoyb
Posts: 1229
Joined: Tue Jul 27, 2004 1:00 am
Location: BEDFORDSHIRE UK

Re: K2f mag dome long nut

Post by Stuoyb »

The nut from the dynamo draw stud serves the purpose very well.

http://www.jampot-spares.com/store/come ... duct=21226
Groily
Member
Posts: 2151
Joined: Thu Jul 04, 2002 1:00 am
Location: NORMANDIE FRANCE

Re: K2f mag dome long nut

Post by Groily »

Special double-ended stud for ali domes. Nadgery but do-able. 2ba as Rob says but hex at mid-point must pass hole in ali dome and then nut on outside etc. Easier to buy than make tbh if available.
Locked