Can anyone tell me where I can purchase about 1 foot of 3/4", bright steel hexagonal bar please? Stainless seems readily available but it's not what I'm looking for.
Thank you in advance
Bright steel hexagonal bar
-
- Member
- Posts: 7
- Joined: Thu Mar 06, 2003 12:00 am
- Location: CUMBRIA UK
-
- Member
- Posts: 1176
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: KENT UK
Re: Bright steel hexagonal bar
Try Milton Keynes Metals (or something similar) i have had some good servive from him
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Bright steel hexagonal bar
Hi
I usually use Chronos for this sort of thing:
https://www.chronos.ltd.uk/acatalog/Hex ... _EN1A.html
Regards Mick
I usually use Chronos for this sort of thing:
https://www.chronos.ltd.uk/acatalog/Hex ... _EN1A.html
Regards Mick
-
- Posts: 663
- Joined: Thu Feb 27, 2014 9:27 am
- Location: Kent, England
Re: Bright steel hexagonal bar
Too old to Rock and Roll but too young to die.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
-
- Member
- Posts: 452
- Joined: Tue May 27, 2003 1:00 am
- Location: SHROPSHIRE UK
Re: Bright steel hexagonal bar
Try your local machine shop or steel stockholders they sometimes have off cuts laying around left over from jobs.
-
- Member
- Posts: 744
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: Bright steel hexagonal bar
I always use M-Machine of Darlington. Wide range, excellent service and postage at cost (no minimum charge). They can also offer advice on which type/alloy is best for the task. Cheers, Andy
-
- Member
- Posts: 7
- Joined: Thu Mar 06, 2003 12:00 am
- Location: CUMBRIA UK
Re: Bright steel hexagonal bar
Thank you for all your replies. I'm sure I should be able to get sorted out now.
-
- Member
- Posts: 3369
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Bright steel hexagonal bar
Andy
Thanks for that, only a short trip for me and I have some plans........
Johnny B
Thanks for that, only a short trip for me and I have some plans........
Johnny B