G3ls valve guides

Helpful information and requests for assitance and advice
Member
Posts: 14
Joined: Wed Jul 15, 2015 7:44 pm
Location: BANFFSHIRE UK

G3ls valve guides

Postby allanmg9 » Tue May 08, 2018 12:05 pm

Hi again , has anybody found a solution to g3ls inlet and exhaust valve guides being too loose, is it possible to purchase oversized replacements . I guess some of you must have come across this and found a cure , here’s hoping !
Allan

Member
Posts: 861
Joined: Wed Oct 12, 2005 9:45 pm
Location: KENT UK

Re: G3ls valve guides

Postby alanengineer » Tue May 08, 2018 12:14 pm

I think Nortons have oversized valve guides available. They are not to difficult to make, i have done a few for my Norton Friends. Over sized oversize

Member
Posts: 5349
Joined: Wed Sep 01, 2004 12:00 am
Location: WEST SUSSEX UK

Re: G3ls valve guides

Postby SPRIDDLER » Tue May 08, 2018 4:12 pm

Russell Motors used to supply them and maybe they still can. Give Les a call. (He doesn't use email).

http://www.russellmotors.co.uk/
What if the Hokey-Cokey is what it's all about?

Member
Posts: 1737
Joined: Wed Oct 12, 2005 9:45 pm
Location: N YORKS UK

Re: G3ls valve guides

Postby 56G80S » Tue May 08, 2018 8:54 pm

T&L Engineering made a new oversize exhaust guide for me and machined the head to fit and fitted it; not to mention puttng in new seat to replace the turning stuffed up one. And stak of other work (like the collapsed head bolt pillars) and re-ling the barrel to standard etc.

It was a good job and now about 1,000 miles since and compression and performance improving as all bed in together.

I have no business or other relationship, just a satisfied cutomer.

Johnny B

Return to Help

Who is online

Users browsing this forum: No registered users and 4 guests