It's so easy to do, been there and done it myself that's why I was convinced that it was the issue.matchbart wrote:OK, it appears to be ok now, i released the retaining nut until the speedo drive was slack then turned it until it appeared to be located better, tightened everything up and it stays in position when wheel rotated, I will do as suggested and take the assembly of and inspect/replace as needed, thanks everyone,
G3ls speedo gearbox
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: G3ls speedo gearbox
-
- Member
- Posts: 3549
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
Re: G3ls speedo gearbox
Don't let a mate do the nut up, do it your self, don't ask me why ask that helpful Mr ajscomboman. (Holland 2016)ajscomboman wrote:It's so easy to do, been there and done it myself that's why I was convinced that it was the issue.matchbart wrote:OK, it appears to be ok now, i released the retaining nut until the speedo drive was slack then turned it until it appeared to be located better, tightened everything up and it stays in position when wheel rotated, I will do as suggested and take the assembly of and inspect/replace as needed, thanks everyone,
Roy
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: G3ls speedo gearbox
I'm not taking the blame for that one Mr B, that's your fault for not packing a decent adjustable! I did ride to the rescue though didn't I even if it meant doubling back when the group got split.G15 Roy wrote:Don't let a mate do the nut up, do it your self, don't ask me why ask that helpful Mr ajscomboman. (Holland 2016)ajscomboman wrote:It's so easy to do, been there and done it myself that's why I was convinced that it was the issue.matchbart wrote:OK, it appears to be ok now, i released the retaining nut until the speedo drive was slack then turned it until it appeared to be located better, tightened everything up and it stays in position when wheel rotated, I will do as suggested and take the assembly of and inspect/replace as needed, thanks everyone,