Anyone know where I can get a pair of the above Chrome or Stainless, (021907) tried Jampot, Steve Serbey, Russell's and Andrew Engineering, all sold out even the Indian Ebay ones are 1 1/8â€.
Thanks in advance.
1 1/4†Fork seal holders
-
- Member
- Posts: 1102
- Joined: Tue Jan 15, 2008 4:18 pm
- Location: SOMERSET UK
-
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
Re: 1 1/4†Fork seal holders
Hello,
Try there in Holland...
https://www.deengelse.com/pageajsm.htm
https://www.deengelse.com/AJS%20RVS%20V ... 201963.pdf
Regards, Ruddy
Try there in Holland...
https://www.deengelse.com/pageajsm.htm
https://www.deengelse.com/AJS%20RVS%20V ... 201963.pdf
Regards, Ruddy
Life is beautiful and you have to enjoy it
-
- Member
- Posts: 1102
- Joined: Tue Jan 15, 2008 4:18 pm
- Location: SOMERSET UK
Re: 1 1/4†Fork seal holders
Thanks Ruddy,
This company has sold out also;
Anyone bought the indian seal holders on E bay, when I contacted them the sizes were
I quote:
"our listed fork size is. from thread side its. 39.90 mm,and from other side it's. 47.30 mm
When I measure against my old ones it didn't quite match up, even though advert stated it was for my bike the G80. These were more like the 1 1/8" size.
Other option is to have old set rechromed, there's a slight dent in one otherwise quite solid so going to Bath and West next weekend so may find someone who would rechrome them.
This company has sold out also;
Anyone bought the indian seal holders on E bay, when I contacted them the sizes were
I quote:
"our listed fork size is. from thread side its. 39.90 mm,and from other side it's. 47.30 mm
When I measure against my old ones it didn't quite match up, even though advert stated it was for my bike the G80. These were more like the 1 1/8" size.
Other option is to have old set rechromed, there's a slight dent in one otherwise quite solid so going to Bath and West next weekend so may find someone who would rechrome them.
Mike
- Stuoyb
- Posts: 1223
- Joined: Tue Jul 27, 2004 1:00 am
- Location: BEDFORDSHIRE UK
Re: 1 1/4†Fork seal holders
Club Spares should have them back in stock within the next two working days.
Supplier is making a delivery today.
Supplier is making a delivery today.
-
- Member
- Posts: 1102
- Joined: Tue Jan 15, 2008 4:18 pm
- Location: SOMERSET UK