Hi, I can not find a supplier who has the bearing with the correct I.D. AMOC parts service replaced my first one, but the replacement suffers the same problem. Purchased a third from a vendor who thought it was not from wassell's, and that is the problem, all of them seem to come from the same manufacturer.McBob wrote:True to their word, the kit supplied by Andrew Engineering is the correct fit, many thanks for the help!
That same manufacturer was most probably Andrew Engineering. It is very strange , you can get advise not to get parts from ABC, go to DEF their parts are much better quality and they fit. But both ABC & DEF use the same supplier. Perhaps there's a bit of luck involved in getting a good or bad one.