Getting my 56 M30 go faster.

Helpful information and requests for assitance and advice
raffles
Member
Posts: 609
Joined: Mon Jan 01, 1990 12:00 am
Location: NORTHAMPTONSHIRE UK

Re: Getting my 56 M30 go faster.

Post by raffles »

If you want to gear up just increase the final drive sprocket. Burman not available from the club, but are from Draganfly Motors
who speacialise in Ariel parts
Tony
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Getting my 56 M30 go faster.

Post by ajscomboman »

Up the gearbox sprocket to 17th. Club stock them, I've done the same to a 55 500cc Mod 20 as I found the original 16th sprocket too buzzy.
G15 Roy
Member
Posts: 3546
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Re: Getting my 56 M30 go faster.

Post by G15 Roy »

I did the same on my G11 special before the trip to Poland this year but made sure that the dynamo was in tip top condition for the increase speed and the bearings were good.
Roy
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Getting my 56 M30 go faster.

Post by ajscomboman »

G15 Roy wrote:I did the same on my G11 special before the trip to Poland this year but made sure that the dynamo was in tip top condition for the increase speed and the bearings were good.
Oh ha ha very funny! The dynamo has been fine for 1000's miles it was just one of those things. I can't be blamed for a worn sealed bearing. :evil:
G15 Roy
Member
Posts: 3546
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Re: Getting my 56 M30 go faster.

Post by G15 Roy »

So as Les W would say blame the PO.
Roy
leswaller
Posts: 615
Joined: Sun Nov 25, 2012 9:40 pm
Location: Chipping Norton

Re: Getting my 56 M30 go faster.

Post by leswaller »

G15 Roy wrote:So as Les W would say blame the PO.
If the cap fits then wear it :P
Les
Rules are for the obedience of fools and the guidance of the wise
Locked