m16 replacement carby
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: m16 replacement carby
I have a concentric on my 55 16ms and it starts easy ticks over and runs very nice
?
-
- Posts: 6
- Joined: Sat Feb 17, 2018 2:54 am
- Location: australia
Re: m16 replacement carby
OK a few are using concentric carbies but what type and jet settings.
Haddy
Haddy
-
- Member
- Posts: 289
- Joined: Sat Jan 01, 2000 12:00 am
- Location: S YORKS UK
Re: m16 replacement carby
My 1953 model 16 runs a Concentric ( The Wassal replacement ) - 26mm bore
Jetted at
160 Main
106 Needle
Throttle slide 3
It tick's over and run's fine on that , but that's how it arrived and I haven't tried to alter any of these .
Jetted at
160 Main
106 Needle
Throttle slide 3
It tick's over and run's fine on that , but that's how it arrived and I haven't tried to alter any of these .
-
- Posts: 6
- Joined: Sat Feb 17, 2018 2:54 am
- Location: australia
Re: m16 replacement carby
Amal say 626/300
-
- Member
- Posts: 289
- Joined: Sat Jan 01, 2000 12:00 am
- Location: S YORKS UK
Re: m16 replacement carby
I would be interested if anyone else has tuned their concentric ,
and what jets they're using .
I just left mine as it came .
as it ran a sight better than with the old ( very tired ) monobloc .
and what jets they're using .
I just left mine as it came .
as it ran a sight better than with the old ( very tired ) monobloc .
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: m16 replacement carby
Bob, your main jet sounds way too small. 1955 350 main jet is 210 on a monobloc, so try 250 on your concentric.
Dave
Dave
-
- Member
- Posts: 289
- Joined: Sat Jan 01, 2000 12:00 am
- Location: S YORKS UK
Re: m16 replacement carby
Wow that seems like a big difference
I'll get one ordered today .
Thanks
I'll get one ordered today .
Thanks
-
- Posts: 6
- Joined: Sat Feb 17, 2018 2:54 am
- Location: australia
Re: m16 replacement carby
Got a second email today from Andy Barlow at Amal he said a 626/300 with a standard 160 main jet will do the job.
Haddy
Haddy