Breaking the Seal on Barrels

Helpful information and requests for assitance and advice
Member
User avatar
Posts: 581
Joined: Sun Nov 25, 2012 9:40 pm
Location: Chipping Norton

Re: Breaking the Seal on Barrels

Postby leswaller » Sun Feb 11, 2018 1:27 pm

By far the best rust releaser is a 50:50 mix of Acetone and ATF, both readily available on Amazon/ eBay.
Put them in in a lever type oil can and apply as necessary. Just make sure that you shake vigorously before use as the two components do not stay mixed but merely form an emulsion.
The theory is that the ATF is a wicking agent and the Acetone eats away the rust by chemical reaction
It works out at about £1 per litre, much cheaper than commercial snake oil
Les
Rules are for the obedience of fools and the guidance of the wise

Member
User avatar
Posts: 361
Joined: Sun Apr 19, 2015 8:13 am
Location: Somerset, UK

Re: Breaking the Seal on Barrels

Postby thornebt » Sun Feb 11, 2018 2:10 pm

leswaller wrote:By far the best rust releaser is a 50:50 mix of Acetone and ATF, both readily available on Amazon/ eBay.
Put them in in a lever type oil can and apply as necessary. Just make sure that you shake vigorously before use as the two components do not stay mixed but merely form an emulsion.
The theory is that the ATF is a wicking agent and the Acetone eats away the rust by chemical reaction
It works out at about £1 per litre, much cheaper than commercial snake oil


The cheapest I can see Acetone on Ebay is about £8.00 per litre. Does anyone know a cheaper source please? Cheers. Bruce.

Member
User avatar
Posts: 581
Joined: Sun Nov 25, 2012 9:40 pm
Location: Chipping Norton

Re: Breaking the Seal on Barrels

Postby leswaller » Sun Feb 11, 2018 2:53 pm

Sorry got my calculations wrong Bruce, Acetone on Amazon is £6.50 per litre and ATF is £3.50. So the cost of a 2 litres of mix would be £10, i.e. £5 per litre.
:oops: I divided by 10 instead of 2 - sorry :oops: :oops:
But still a lot cheaper than commercial preparations
Les
Rules are for the obedience of fools and the guidance of the wise

Member
User avatar
Posts: 2356
Joined: Thu Sep 11, 2003 12:00 am
Location: KENT UK

Re: Breaking the Seal on Barrels

Postby GOLDSTAR » Sun Feb 11, 2018 3:46 pm

as an aside the French supermarkets sell acetone 500 mil or so an euro or two, should anyone be that way. kind regards

Member
Posts: 120
Joined: Tue May 27, 2003 12:00 am
Location: SHROPSHIRE UK

Re: Breaking the Seal on Barrels

Postby bitza » Sun Feb 11, 2018 6:23 pm

For acetone try any local company who works in fibre glass, this is how I got hold of some, beware they will not put it a metal container
Mick I'm sure you have released all ten bottom barrel nut's , also there's a printable trident t 160 workshop available on the net,
Look in manualslib. Com you can grab the pages you might need, that is if you have'nt a manual.
,

Committee
Posts: 241
Joined: Mon Jan 01, 1990 12:00 am
Location: NORTHAMPTONSHIRE UK

Re: Breaking the Seal on Barrels

Postby raffles » Fri Feb 16, 2018 7:26 pm

In the long distant past ,if we had two different metals corroding together we soaked it in malt vinegar OR cocoa cola
both worked well
Tony

Member
Posts: 2
Joined: Wed Jan 01, 1992 12:00 am
Location: Buckinghamshire

Re: Breaking the Seal on Barrels

Postby peyton » Fri Feb 16, 2018 7:57 pm

Can you fix something up that will lift the unit by the head/barrel to allow gravity to join in. Not to high though. Hth. Regards Neil .

Previous

Return to Help

Who is online

Users browsing this forum: No registered users and 6 guests