Rear brake switch bracket

General purpose topics/chat goes in here
Locked
electrajohnt
Posts: 136
Joined: Wed May 08, 2019 7:41 pm
Location: UK

Rear brake switch bracket

Post by electrajohnt »

Is the correct position of the rear brake light switch bracket outside the fork leg or should it be the inside of the fork leg. It all seems a bit congested here. Also when I tighten the spindle nut withe bracket on the outside the bracket turns with the nut, I can only hold it in position with less force than I would expect to apply to the spindle nut, which means the nut is probably nut tight enough.
JohnT
JohnT
John Jarrett
Member
Posts: 438
Joined: Wed Oct 12, 2005 10:45 pm
Location: MIDDLESEX UK

Re: Rear brake switch bracket

Post by John Jarrett »

Do you have the spacer on the outside of the swingarm that has a recessed area for the bracket to fit over and clamp tight when the nut/washer is tightened?
Mick D
Posts: 2886
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Rear brake switch bracket

Post by Mick D »

Hi

On my 60 G3 the bracket is on the outside of the swinging arm fork followed by the spacer where the chain adjuster bears, washer and then the nut.

Regards Mick
Locked