I removed these four bushes from the rocker cover a while ago.
Now have new ones to fit. I notice they have crossover scrolls and did not record their orientation.
So my question is - should they be fitted scrolls up or down.
Thanks Ian
Rocker Shaft Bushes Late H/W Singles
-
- Member
- Posts: 28
- Joined: Wed Nov 11, 2009 11:18 pm
- Location: LEICESTERSHIRE UK
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Rocker Shaft Bushes Late H/W Singles
I don't think it matters, if it does I been fitting them wrong for years..........ooops
Colin
Colin
only dead fish go with the flow
-
- Member
- Posts: 3365
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Rocker Shaft Bushes Late H/W Singles
Samne here, it's a long time since I did the job and all still good after many 1,000's of miles. I also took no note of the orientation.
Johnny B
Johnny B
-
- Member
- Posts: 28
- Joined: Wed Nov 11, 2009 11:18 pm
- Location: LEICESTERSHIRE UK
Re: Rocker Shaft Bushes Late H/W Singles
Thanks for your views.
Think i will fit them scrolls down so that a small amount of oil can puddle in them and be wiped around the rocker sleeve's external surface.
Well that is my logic anyway.
Think i will fit them scrolls down so that a small amount of oil can puddle in them and be wiped around the rocker sleeve's external surface.
Well that is my logic anyway.