G3ls valve lifter cable securing
-
- Member
- Posts: 10
- Joined: Thu Jun 13, 2019 5:08 pm
- Location: Cumbria UK
G3ls valve lifter cable securing
How does the valve lifter cable keep secured in the cylinder head on my 1955 G3ls, I can see it slots through the lever then goes into the rocker cover, but how is this secured, I will use a photo that I used previously, I am going to order a cable and want to know what else I need.
You do not have the required permissions to view the files attached to this post.
- dave16mct
- Member
- Posts: 3245
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: G3ls valve lifter cable securing
You don't need anything else, the adjuster on the cable screws into the boss on the right.
Dave.
Dave.
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: G3ls valve lifter cable securing
Like this:
Regards Mick
Regards Mick
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 10
- Joined: Thu Jun 13, 2019 5:08 pm
- Location: Cumbria UK
Re: G3ls valve lifter cable securing
Thank you for photo, replies.