I recently purchased a G11 newly rebuilt. I have a dodgy right knee and find it difficult to kick over. Does anyone have any info on fitting an electric start to this model? Would be most grateful for any advice.
Peter.
Electric starter for G11
-
- Posts: 2
- Joined: Mon Nov 04, 2019 4:30 pm
- Location: UK
- dave16mct
- Member
- Posts: 3234
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Electric starter for G11
You asked this question 2 days ago. ??
-
- Member
- Posts: 106
- Joined: Thu Feb 21, 2013 8:36 am
- Location: hampshire
Re: Electric starter for G11
Have been working on a electric leg for a while but unfortunately it will be having a different primary chain case so it will not be original if you need more p.m me and I will tell you more
-
- Member
- Posts: 3546
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
- spookefoote1956
- Member
- Posts: 1836
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Electric starter for G11
Do tell more!poptsova wrote:Have been working on a electric leg for a while but unfortunately it will be having a different primary chain case so it will not be original if you need more p.m me and I will tell you more
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
-
- Deceased
- Posts: 17
- Joined: Mon Jan 01, 1990 12:00 am
- Location: FRANCE
Re: Electric starter for G11
Hi,
You can find informations here : https://www.accessnorton.com/NortonComm ... 4204/page-
I've worked on the solution for twin : it's necessary to have alloy primary chaincases to adapt the fixing of the starter motor
If you have some questions , don't hesitate to contact me here : jp.altayrac@orange.fr
You can find informations here : https://www.accessnorton.com/NortonComm ... 4204/page-
I've worked on the solution for twin : it's necessary to have alloy primary chaincases to adapt the fixing of the starter motor
If you have some questions , don't hesitate to contact me here : jp.altayrac@orange.fr