I decided to spray epoxy primer onto the garnet blasted black stuff.
It will keep the rust away whilst the parts are in storage and the finish is reasonably smooth as you can see in the photo. A little bit of sanding and then one or two top coats when I get the parts out of storage in 2021 !
Sent from my iPhone using Tapatalk
to powder coat or not ?
-
- Posts: 135
- Joined: Tue Oct 22, 2019 3:42 pm
- Location: florida
Re: to powder coat or not ?
1954 AJS 18S Cyprus export (frame decode says 1954 but many components match a 1955).