Petrol Tank Repairs
-
- Member
- Posts: 37
- Joined: Mon Sep 16, 2013 1:40 pm
- Location: BUCKINGHAMSHIRE UK
Petrol Tank Repairs
Any recommendations for petrol tank repairs? I'm looking for somebody that can cut out the bad metal and then weld or braze in new. The tank is a steel comp type and it has some pinholes along the bottom edge.
-
- Deceased
- Posts: 598
- Joined: Sun Oct 07, 2018 11:36 pm
- Location: Essex UK
Re: Petrol Tank Repairs
What I did with mine was lead load it with proper body repair lead. It worked a treat, plus the fact as I used a large soldering iron there was no flame involved,
If it's just a small repair I'd try that. Just make sure everything is spotlessly clean and fluxed.
If it's just a small repair I'd try that. Just make sure everything is spotlessly clean and fluxed.
-
- Member
- Posts: 452
- Joined: Tue May 27, 2003 1:00 am
- Location: SHROPSHIRE UK
Re: Petrol Tank Repairs
Dent Doctor based Walsall WEST MIDS also on the web, and most bike mags.
-
- Member
- Posts: 37
- Joined: Mon Sep 16, 2013 1:40 pm
- Location: BUCKINGHAMSHIRE UK
Re: Petrol Tank Repairs
Looking for a proper repair. It has been leaded before, but I now have issues with the flux causing the paint t lift.
It needs more than dents removing.
It needs more than dents removing.
-
- Posts: 21
- Joined: Fri Sep 21, 2012 8:05 am
- Location: DORSET UK
Re: Petrol Tank Repairs
Hi
I would recommend GD Designs advertises in the Jampot very good and reasonable price
Regards
Clive
I would recommend GD Designs advertises in the Jampot very good and reasonable price
Regards
Clive