Different valve collets for an 18CS shortstroke motor

General purpose topics/chat goes in here
Locked
User avatar
Stephen R
Posts: 12
Joined: Sun Jun 09, 2019 8:40 pm
Location: Wiltshire UK

Different valve collets for an 18CS shortstroke motor

Post by Stephen R »

I'm trying to prepare a replacement head for the Ramsay 18CS/31CSR Special. Tim left me with an immaculately prepared head which however has this difference and I have no collets for it. The new valves are at the top of the photo and as you can ssee they have plain minor diameter locations for the collets, not the grooves which the original head/valves had. What collets should I use, any ideas?
You do not have the required permissions to view the files attached to this post.
bodgert
Member
Posts: 32
Joined: Mon Jan 01, 1990 12:00 am
Location: CHESHIRE UK

Re: Different valve collets for an 18CS shortstroke motor

Post by bodgert »

Try spares dept I obtained these from them some time ago Bodger
Locked