Imminent Catastrophe?
- clive
- Member
- Posts: 5670
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Imminent Catastrophe?
Well i could really only hear it on the second video, was this the left hand side recording ? If my theory is correct, as it appears to be only one spring that is touching the tap would be at half engine speed. It would not be a large job to change the springs on the inlet valve round as it could be done with the head still in place. Set it to Tdc to avoid loosing the valve stem.
clive
if it ain't broke don't fix
if it ain't broke don't fix
- Expat
- Member
- Posts: 1034
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Imminent Catastrophe?
Clive,clive wrote:Well i could really only hear it on the second video, was this the left hand side recording ? If my theory is correct, as it appears to be only one spring that is touching the tap would be at half engine speed. It would not be a large job to change the springs on the inlet valve round as it could be done with the head still in place. Set it to Tdc to avoid loosing the valve stem.
Yes agreed and it was the left side. As mentioned earlier, it's more noticeable from the left side as you say. Wondered if it would be possible to do the job in situ so pleased you can confirm that.
Maybe when the weather cools I will tackle it. I did install a/c and extra lighting in the garage, but you can't top natural light and fresh air.
Will def let y'all know how it goes.
Thanks again,
Steve
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- clive
- Member
- Posts: 5670
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Imminent Catastrophe?
No guarantees on being able to do it in situ but theoretically I think it is so. Now I am intrigued by this issue and have done a bit of research in Christians archives. Looking at the Neill and Pitman books they both have a illustration of using the installation tool for the later tray. This seems to come from the AMC published owners handbook, along with the advice. No mention of which way round the springs should go HOWEVER the illustration does show them installed the same way on both valves. In both cases the spring with the inner loop is shown going on the tappet side. The spring with the outer loop is shown as being on the spark plug side. Looking at your head the exhaust side is fitted that way but the inlet side is the other way round. I have often wondered if there is a correct way to fit the springs. The final proof of the pudding will be when you do the work. Extra lighting and A/C indeed I have to work in the cold garage a mile and a half away and no power!
clive
if it ain't broke don't fix
if it ain't broke don't fix
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Imminent Catastrophe?
You can definitely do the job in situ. Remove spark plug and put soft rope into the combustion chamber while the piston is half way down the barrel on the firing stroke. Insert enough rope to fill the chamber when the piston is slowly raised to tdc but do not use undue force! The compressed rope will hold the valve in position whilst you remove the springs. Replace them in the correct position and then rotate the engine slowly back wards, carefully remove the rope and insert the spark plug, job done!
- Expat
- Member
- Posts: 1034
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Imminent Catastrophe?
What great advice coming through.
You blokes are convincing me I should do the job just to see if it makes a difference for the better. Which of course is the aim of all of us offering advice. Just don't tell me it's a job best done at the side of the road.......in the rain........at night.
It's a job on the list.......after the ‘honey do' stuff. You know, kitchen, garden, car, three delivery van issues, a/c in the shop not working etc etc etc.
Thanks for the advice and encouragement.
Steve
You blokes are convincing me I should do the job just to see if it makes a difference for the better. Which of course is the aim of all of us offering advice. Just don't tell me it's a job best done at the side of the road.......in the rain........at night.
It's a job on the list.......after the ‘honey do' stuff. You know, kitchen, garden, car, three delivery van issues, a/c in the shop not working etc etc etc.
Thanks for the advice and encouragement.
Steve
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- Expat
- Member
- Posts: 1034
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Imminent Catastrophe?
clive wrote: Extra lighting and A/C indeed I have to work in the cold garage a mile and a half away and no power!
Oh how I miss that situation.
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- Pharisee
- Member
- Posts: 1127
- Joined: Tue Mar 15, 2016 8:51 pm
- Location: Lincolnshire UK
- Contact:
Re: Imminent Catastrophe?
The valve springs on my M18 are set up the same way as Expat's. The valve spring seats only fit one way round as there is 'dimple' on their underside that locates in a hole drilled into the head casting. The spring seats have wear marks on them which indicate which way round the springs were fitted. I put them back the way the wear marks indicated.clive wrote:I could be onto something here. Your two valves are set up with the springs round a different way to each other in your photo. Change over the left hand set to match the right hand set.
Clive, are you saying definitively that this is incorrect and if so which one (inlet or exhaust) should be fitted the other way around, please?
You do not have the required permissions to view the files attached to this post.
I'm from the Fens.... Gimme six.
- clanger9
- Posts: 1165
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Imminent Catastrophe?
Does it matter which way round they are fitted? The workshop manual shows the springs fitted either way...
Fig. 21 shows them "swapped" whereas Fig. 13 has both "top" springs on the pushrod side:
Fig. 21 shows them "swapped" whereas Fig. 13 has both "top" springs on the pushrod side:
You do not have the required permissions to view the files attached to this post.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Imminent Catastrophe?
Hi
For what it's worth, mine are fitted opposite to those of Expat - no collision with the rocker box - they just went back 'as found'.
Regards Mick
For what it's worth, mine are fitted opposite to those of Expat - no collision with the rocker box - they just went back 'as found'.
Regards Mick
- Expat
- Member
- Posts: 1034
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Imminent Catastrophe?
Blimey, what an interesting bucket of wriggly things this has turned out to be!
Interesting though.
Interesting though.
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)