Clutch pushrod adjuster.
-
- Member
- Posts: 790
- Joined: Sat Jan 01, 1994 12:00 am
- Location: LINCOLNSHIRE UK
Clutch pushrod adjuster.
Has anyone got a clutch pushrod adjuster 25-7-3 as fitted to pressure plate on B52 clutch. I would like to know how long it is and weather a ball bearing is fitted between pushrod and adjuster. The manual seems to contradict itself by listing a ball bearing but the drawing of the assembled clutch clearly shows no ball bearing at either end of the rod.
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Clutch pushrod adjuster.
There's only one: 17-3-2, at the offside (kickstart) end of the rod. Note the two clutch thrust rod lengths.
See Spares List...........
The ball is shown in all the drawings available in Christians Archive... http://archives.jampot.dk/technical/Tra ... on/Burman/
See Spares List...........
The ball is shown in all the drawings available in Christians Archive... http://archives.jampot.dk/technical/Tra ... on/Burman/
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 790
- Joined: Sat Jan 01, 1994 12:00 am
- Location: LINCOLNSHIRE UK
Re: Clutch pushrod adjuster.
thank you very much for that spridler all is clear now