Hi
I have a 1955 G80s.
Is it possible to adjust the tappets with the petrol tank in situ?
Cheers
Chris.
Tappet adjustment
-
- Posts: 6
- Joined: Mon May 15, 2017 3:01 pm
- Location: Rhondda. UK
-
- Member
- Posts: 1175
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: KENT UK
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Tappet adjustment
Sounds like you have never adjusted tappets. Look in your instruction manual. Page 33. You only need to remove the 3 acorn nuts, to remove the tappet cover. You will need a thin spanner to get on the tappet lock nut, thin like the simple flat steel bicycle spanners were. Normal open ended spanner will be too thick.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 6
- Joined: Mon May 15, 2017 3:01 pm
- Location: Rhondda. UK
Re: Tappet adjustment
Thanks for the info.
Hope all goes well !!
Ta
Chris
Hope all goes well !!
Ta
Chris