replacement 6 volt LED bulbs
-
- Posts: 264
- Joined: Sun Apr 30, 2017 10:42 pm
- Location: ARGYLL UK
replacement 6 volt LED bulbs
Wanting to replace the bulbs on my G80s '54 for LEDS - sods law being what it is, I can find every fitment in 6 volt bar the ones for my bike . Has anyone got a list of LEDs/suppliers that will fit?
-
- Posts: 663
- Joined: Thu Feb 27, 2014 9:27 am
- Location: Kent, England
Re: replacement 6 volt LED bulbs
Try here Stephen http://www.dynamoregulatorconversions.c ... ds-etc.php
I bought all the bulbs for my 52 G80 from them. If in doubt, give them a call. I found them very helpful.
Jim
I bought all the bulbs for my 52 G80 from them. If in doubt, give them a call. I found them very helpful.
Jim
Too old to Rock and Roll but too young to die.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
-
- Posts: 264
- Joined: Sun Apr 30, 2017 10:42 pm
- Location: ARGYLL UK
Re: replacement 6 volt LED bulbs
Jim - you're a star! - I been on ebay for hrs tonight trying to find the right bulbs. Very grateful for this info
Stephen
Stephen
-
- Member
- Posts: 35
- Joined: Fri Mar 14, 2008 5:04 pm
- Location: WEST SUSSEX UK
Re: replacement 6 volt LED bulbs
Paul Goff at http://www.norbsa02.freeuk.com/index.htm has all you need. Recommended.
- ajscomboman
- Member
- Posts: 3969
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: replacement 6 volt LED bulbs
Got 2 of the dynamo regulator conversions LED double dipper lamps and I'm very pleased with the way they perform. I only have the short dynamos on the singles and every bit of power saving helps. They're expensive but I find them far better quality than the offerings from others.
-
- Posts: 41
- Joined: Mon Aug 08, 2016 9:22 pm
- Location: WILTSHIRE UK
Re: replacement 6 volt LED bulbs
without a doubt this chap in Bristol knows everything about bike LEDS and his prices beat them all, superb service and advise, i last met him at shepton mallet last year! contact 08002465678, e mail classiccarleds.co.uk regards David
-
- Posts: 663
- Joined: Thu Feb 27, 2014 9:27 am
- Location: Kent, England
Re: replacement 6 volt LED bulbs
Great range of lamps but no BPF headlamp bulbs in 6 or 12v.david pollard wrote:without a doubt this chap in Bristol knows everything about bike LEDS and his prices beat them all, superb service and advise, i last met him at shepton mallet last year! contact 08002465678, e mail classiccarleds.co.uk regards David
Jim
Too old to Rock and Roll but too young to die.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
1952 G80 rigid, 1960 G12 DL / Watsonian Monza, 1954 G80S.
-
- Posts: 264
- Joined: Sun Apr 30, 2017 10:42 pm
- Location: ARGYLL UK
Re: replacement 6 volt LED bulbs
I've only found one BPF LED online and that was 12 v from HK - maybe have to change the bay for a more common bulb
-
- Member
- Posts: 850
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: replacement 6 volt LED bulbs
If you are going to Founders Day at Stanford hall in 2 weeks time, you will probably find dynamoregulators.com there. I have BPF led in the headlamp and led stop and tail from him on my G80CS from1953, brilliant. I also have a single pole 52 watt led in my 1929 AJS V twin! So if your battery is good and bike stops charging you have at least 8 hours of light from the battery.
- 1957M30
- Posts: 156
- Joined: Wed Feb 01, 2017 11:19 pm
- Location: Hertfordshire
Re: replacement 6 volt LED bulbs
I posted a link in the recommendations section a while back
http://www.jampot.com/forum/viewtopic.php?f=10&t=19616
It's defenately the best supplier by far....💡ðŸ‘
http://www.jampot.com/forum/viewtopic.php?f=10&t=19616
It's defenately the best supplier by far....💡ðŸ‘
Ride Safe & don'wear beige