Plug type poll.

[BRobbo]

1948 500cc single Iron Head, compression plate removed; Champion L82c

1963 CSR 650cc single carb; Champion N5

[Peter Morris]

1967 Matchless G15CS NGK B7ES

[Rob Harknett]

Rob, also correct NGK (all entries).

Rob C

I never noticed that Rob. I must have miss typed the very first one, I seem to recall getting prompted a typo for the second, that I had actually typed in correct, but the file memory was telling me it was wrong, from then on they all entered wrong.
Looks like we are getting back on topic again, so I will carry on building the file one forum page at a time. I have added to 2 new entries on forum page 5. I'll up date the file here when page 6 has completed

[Expat]

1960 G3, NGK B7ES has been fine.

[Ludwig]

1966 G15CS Champion N7YC

[clanger9]

Forum poll. July 2017 Plug types used with todays fuel .pdf

Finale result of poll.
Unless there are any more members that would like to add to it by giving details required. As seen in the file.

Rob,

My M14CSR (Bosch W8CC plug) is 1966, not 1961.

Cheers,
Paul.

[Rob Harknett]

The question of what plug to use with todays fuels often arises. We have nothing in tech tips on the subject. So I have said I would try and conduct a poll. Then make a file for guidance. We do need a lot of response to make this successful.
Please reply stating your bike year and model and the plug you are satisfied works OK, even if the said plug is that which was recommended in the workshop manual . Please try and keep replies to that underlined above.

Thanks to the many members that contributed information to help other members.

Are there any more members that would like to add more details for the above Poll. I will let the poll run over the week end, then complete the finale file for publication.

[JimFitz]

52 G80 N4C
54 G80S N4C
60 G12DL N4C

Jim

[Rob Harknett]

Many thanks to those that took part in producing this file to assist other members.
Finale result;

Forum poll. Plug types suitable for 2017 fuel.pdf