🏍 BIKE DOLLY 🏍

[1957M30]

Hi there does anyone use a bike dolly or turntable ❓
Am on the hunt for one that's rated over 400lbs/180kg

Thanks

Karol

[Rob Harknett]

Try making one. See mine below that just slots together with a board on top.

2.jpg

[Bogwheel]

Did you have to post that?
I'm now orf to the workshop to dig through the scrap bin.

[leswaller]

Alternatively get a scaffolding plank from your local building supplies merchant and cut it down to just longer than your bike then mount a lazy susan on it. I got one these below and it works well

http://www.ebay.co.uk/itm/12-300mm-Heav ... Sw8w1YAJNf

[mick h]

I use a motorcycle tail swinger, it rotates the bike 360 degrees around the front wheel placement point, they often turn up on ebay.

[Mick D]

Hi

Replace the fixed wheels on your quad lift for steerable ones?

Regards Mick

[clive]

found one for you

dmb46_c_16_226.jpg

[Rob Harknett]

I also have a hospital bed converted to a bike lift. That will turn easy, if I had space to turn it.

[G15 Roy]

image.jpeg

[quote="clive"]found one for you

I think mine is better.?

[Expat]