K6 Big Port Exhaust
-
- Posts: 1
- Joined: Sun Jul 22, 2018 12:49 pm
- Location: Derbyshire UK
K6 Big Port Exhaust
I am currently restoring a k6 350cc k6 and I struggling to obtain an exhaust. I have the original downpipe to copy. Where could I get one bent or is there a similar 1" 3/4" AJS exhaust I could modify by cutting removing brackets and welding. My last resort will be ton form one myself
- Stuoyb
- Posts: 1229
- Joined: Tue Jul 27, 2004 1:00 am
- Location: BEDFORDSHIRE UK
Re: K6 Big Port Exhaust
Try NRP at Bilsthorpe (Notts), they made some special pipes for a friends ex-WD Bike.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: K6 Big Port Exhaust
There must be many companies that will make one. Here's one alldensexhausts@outlook.com in Market Rasen Lincs.
Getting the flange correct is very important, so the collar will screw on the barrel OK. The joker you made one I have for a K8 only made scarp. It was not flanged, had a bit welded on in a crude attempt to make a flange.
Getting the flange correct is very important, so the collar will screw on the barrel OK. The joker you made one I have for a K8 only made scarp. It was not flanged, had a bit welded on in a crude attempt to make a flange.
- bjork
- Member
- Posts: 1908
- Joined: Wed Jan 01, 1997 12:00 am
- Location: LEICESTERSHIRE UK
- Location: Leicestershire
Re: K6 Big Port Exhaust
Rob Harknett wrote:There must be many companies that will make one. Here's one alldensexhausts@outlook.com in Market Rasen Lincs.
Getting the flange correct is very important, so the collar will screw on the barrel OK. The joker you made one I have for a K8 only made scarp. It was not flanged, had a bit welded on in a crude attempt to make a flange.
I'll second the recommendation for Alldens. Had my Morini trail bike special exhaust made there. Flanged header pipes and some extremely tight bends included. Not quick or cheap but worth every penny for the standard of the work.
Using yesterdays technology to create tomorrows problems today
-
- Member
- Posts: 850
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: K6 Big Port Exhaust
I have an exhaust from my M9, this could be modified. I can take it to the Jampot if of interest.